Quality Control Engineer at Shielders Advanced Industries in Abu Dhabi

• Conduct stage-wise visual and dimensional inspections before, during, and after welding in accordance with CSWIP 3.1 standards.
• Monitor welding processes (SMAW, GMAW/FCAW, GTAW, SAW) and enforce compliance with approved Welding Procedure Specifications (WPS) and PQR.
• Validate welder qualifications and maintain updated Welder Performance Qualification (WPQ) records.
• Enforce specialized handling, cutting, and welding procedures for high-strength, armored, or shielding metal plates to protect structural integrity and ballistics/shielding performance.
• Perform precision dimensional inspection of CNC machined parts (in-house and supplier-provided) against engineering drawings using micrometers, calipers, height gauges, bore gauges, and CMM reports.
• Verify geometric tolerances (GD&T) including concentricity, runout, perpendicularity, flatness, and surface finish roughness (Ra values).
• Inspect incoming raw materials, fastners, and outsourced components; cross-check physical shipments against Material Test Reports (MTRs), mill certificates, and purchase orders.
• Issue Supplier Discrepancy Reports (SDR) and Non-Conformance Reports (NCR) for defective incoming lots or out-of-spec machined parts.
• Inspect surface preparation (grit/shot blasting) to ensure required blast profile/roughness and cleanliness levels per ISO 8501-1 (e.g., Sa 2.5).
• Monitor environmental conditions prior to paint application (ambient temperature, steel surface temperature, relative humidity, and dew point).
• Measure Wet Film Thickness (WFT) during application and Dry Film Thickness (DFT) after curing using calibrated magnetic/electromagnetic gauges.
• Perform coating integrity testing, including adhesion testing (cross-hatch/pull-off per ISO 4624 / ASTM D4541) and holiday/pinhole testing where applicable.
• Perform and coordinate NDT methods (VT, PT, MT, and UT/RT review) to verify weld and material soundess.
• Ensure all shop operations comply with ISO standards (ISO 9001, ISO 3834) and relevant API specifications(e.g., API 650, API 1104, API Spec Q1/Q2).
• Prepare complete Quality Control Documentation packages, including Inspection and Test Plans (ITPs), final Manufacturing Data Reports (MDRs), release notes, and coating reports.
• Coordinate witness inspections with Third-Party Inspection (TPI) agencies and client representatives.

Pay: AED6,500.00 - AED11,000.00 per month

Application Question(s):

• Do you have a Bachelor’s Degree or Diploma in Mechanical, Metallurgical, or Manufacturing Engineering or related field?
• Do you have a Minimum 3 years of hands-on QC experience in metal fabrication, precision CNC machining, and industrial coating environments?
• Do you have all or any of the following certification? CSWIP 3.1 Certified Welding Inspector / NDT Level II in Visual Testing (VT), Liquid Penetrant Testing (PT), and Magnetic Particle Testing (MT) / BGAS-CSWIP or NACE / AMPP Level 1 or 2 Coating Inspector certification (or equivalent demonstrable experience in painting/coating inspection)?
• Are you Proficient in reading complex engineering assembly drawings, GD&T symbols, and welding symbols?
• Do you have a Direct working knowledge of ISO (ISO 9001, ISO 3834, ISO 8501 or any) and API codes?
• Do you have a Hands-on familiarity with armored/shielded steel alloys, CNC machining tolerances, and protective coating systems (epoxy, polyurethane, zinc-rich primers)?

Work Location: In person