Repair Maintenance Technician/HDR技术员 at Samtec · Huizhou

Descripción

Puesto en Samtec, Inc

Job title: REPAIR MAINTENANCE TECHNICIAN**职称：**初级技术员/技术员 ****

Code: 33-xx-00-110-xxx

Summary/Objective: Responsible for setup, maintaining, testing, adjusting, and supporting manufacturing machinery and machinery processes, which could include dies and molds. Will provide preventative maintenance on any problematic manufacturing issues and process equipment if necessary, as well as troubleshoot on a wide spectrum of tooling and production equipment.、

**摘要/目标：**负责制造机器及机械加工流程（可能包括模具和铸模）的安装、维护、测试、调试及相关技术支持工作。必要时，将针对任何存在问题的制造环节及工艺设备提供预防性维护，并对各类模具及生产设备进行故障排查。

Essential Functions/ Responsibilities**基本职能/**职责： ****

• Coordinate assigned PM tasks with manufacturing to minimize machine downtime while maintaining a minimum of 90% OTD.

与制造部门协调分配的PM任务，以尽量减少机器停机时间，同时保持至少90%的按时OTD（按时交付率）

• Support Maintenance Supervisor or Engineering on projects related to equipment and/or equipment upgrades.

在涉及设备和/或设备升级相关的项目中，为维护主管或工程部门提供支持

• Occasionally perform light machining and basic electrical controls repairs.

偶尔执行简单机加工和基本电气控制维修工作

• Utilize Solution Center Tools Level 1 to communicate manufacturing issues that cannot be resolved on the production floor.

利用解决方案中心一级工具报告生产车间无法解决的制造问题

• Assemble and debug new tooling.

组装和调试新模具

• Troubleshoot and maintain current tooling.

对当前模具进行故障排除和维护

• Order and maintain purchased tooling, replacement tools and additional capacity.

订购和维护购买的模具、替换工装夹具以应对额外产能

“The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities”

“本岗位所列职责仅为一般性指导原则，根据员工的能力和专长，可能被安排承担其他相关工作任务。”

Required Experience**所需经验:**

• 3-5 Years’ Experience in a Technical or Manufacturing environment.

3-5年技术或制造环境工作经验

• Must have 20/40 correctable vision.

必须具备矫正后20/40（即国际标准视力表中的0.5）以上的视力

• Experience as maintenance or equipment technician.

有维修或设备技术员经验

• Experience reading product blue prints.

有阅读产品图纸的经验

• Electrical experience including, but not limited to, proximity sensors, servo motors, production cameras, programming and troubleshooting PLC’s is a plus.

电气经验，包括但不限于接近传感器、伺服电机、生产摄像头、PLC编程和故障排除。

• Tool and Machine background including experience in basic machinist skills, general die mechanics and bench work, and soldering, is a plus.

有工装夹具和机器背景，包括基本机械师技能、一般模具力学和钳工工作经验，以及焊接经验者优先。

• Familiar with MS Office applications (PowerPoint, Excel, Word, Outlook).

.熟悉Office办公软件（PowerPoint、Excel、Word、Outlook）

• Must be able to handle multiple tasks and work independently.

必须能够处理多项任务并独立工作

• Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.

必须能够连续坐/站立90分钟，且无感官缺失或肢体功能障碍

• Lifting Requirements: Must be able to lift up to 50 pounds from floor to waist.

起吊要求：必须能够从地板到腰部起吊高达50磅

• Hazards and Atmospheric Conditions: Must be willing to adhere to department safety rules and regulations. May be exposed to noise (required to wear protective gear). May be exposed to Hazardous Materials & Chemicals (required to wear safety glasses and other protective gear).

潜在危害与环境因素：必须遵守部门安全规章制度。工作中可能接触噪音（需佩戴防护装备），也可能接触危险物料及化学品（需佩戴护目镜及其他防护装备）。

• CPR/First Aid/AED training

心肺复苏术/急救/AED培训

---

Education**学历:**

• High school diploma or equivalent is required.

高中学历或同等学历

• 2-Year or 4-Year Electrical or Mechanical or Manufacturing Engineering/Technical Degree is preferred.

2年或4年电气或机械或制造工程/技术学位优先。

• Tool & Die or Electrical Journeyman/Certification is a plus.

持有工装夹具与模具相关证书或电工职业资格者优先

• Experience can be used to supplement or replace educational requirements.

经验可以用来补充或取代教育要求